At that point, I hit tractorhouse.com and tractordata.com to see what the specific models had sold for recently with similar hours. (Hours on tractors are like miles on a car, and are noted with the make and model on most auction listings.) I ran the makes and models through Craigslist, too, and did a general Google search with the terms “for sale” tacked on. A 2015 post on the L3750 on tractorbynet.com without the backhoe and fewer hours went for $13,900. Other posts said $10,000-plus in decent condition and an ad from Pennsylvania with nearly identical hours and no backhoe listed for $13,500. I made a mental note that, if there weren’t any problems with the actual machine, I wouldn’t spend more than $11,000.
Hydraulic excavator capabilities have expanded far beyond excavation tasks with buckets. With the advent of hydraulic-powered attachments such as a breaker, a grapple or an auger, the excavator is frequently used in many applications other than excavation. Many excavators feature a quick coupler for simplified attachment mounting, increasing the machine's utilization on the jobsite. Excavators are usually employed together with loaders and bulldozers. Most wheeled, compact and some medium-sized (11 to 18-tonne) excavators have a backfill (or dozer) blade. This is a horizontal bulldozer-like blade attached to the undercarriage and is used for levelling and pushing removed material back into a hole.
Can you dig it? Add an excavator to your repertoire and you have the hydraulic-powered muscle to tackle an incredible range of tasks. These powerful machines, manufactured by the likes of Caterpillar and Bobcat, make short work of trench-digging and forestry work, and by shopping the huge inventory on eBay you have the opportunity to pick a make and model that fits your requirements and budget.
On their own, compact tractors are powerful engines with wheels that can go pretty much wherever you want them to go. When they are combined with extra equipment, however, their power increases greatly. Most compact tractors have loaders on the front, which feature two parallel arms with connectors on the ends. Some of the following accessories attach to these loaders, and others attach to the back or the bottom of the tractor.
The conventional bucket of many skid loaders can be replaced with a variety of specialized buckets or attachments, many powered by the loader's hydraulic system. These include backhoe, hydraulic breaker, pallet forks, angle broom, sweeper, auger, mower, snow blower, stump grinder, tree spade, trencher, dumping hopper, pavement miller, ripper, tillers, grapple, tilt, roller, snow blade, wheel saw, cement mixer, and wood chipper machine.
Tractor paid for, and loaded on to Kyle’s trailer, I called my wife. After a brief “conversation” about the home renovations all that cash could cover, the tractor was dropped off at Phelps’ garage. Rather than me figuring the machine out, I had Bill give it a once over, replace all the fluids, the few bad hoses, straighten the bent loader bucket, and re-pack that leaky swing arm cylinder. There was a new battery, too, and a few other things, which rung up to $1,500 or $500 more than I had anticipated before I started bidding.
Some of the biggest names in the world produce skid steer loaders, including Bobcat, New Holland and Kubota. Consider a Boxer mini skid for domestic and small-scale applications, or invest in a powerful John Deere or Caterpillar loader for commercial use.  Even if you choose to buy a second-hand machine, you have the peace of mind that comes from knowing you have bought something built to last.
Some models of skid steer now also have an automatic attachment changer mechanism. This allows a driver to change between a variety of terrain handling, shaping, and leveling tools without having to leave the machine, by using a hydraulic control mechanism to latch onto the attachments. Hydraulic supply lines to powered attachments may be routed so that the couplings are located near the cab, and the driver does not need to leave the machine to connect or disconnect those supply lines.
If you are looking for a used skid steer for sale, these are the major manufacturer names you will come across: ASV, BELLE, BOBCAT, CASE, CATERPILLAR, CONMIX, COUGAR, DAEWOO, DINGO, DITCH WITCH, DOOSAN, DOZCO, ERMOTEC, FIAT-HITACHI, FORWAY, GAMZEN, GEHL, HYDRA MAC, HYDROTEK, HYUNDAI, IHIMER, INGERSOLL RAND, JCB, JICO, JOHN DEERE, JUNLIAN, KOMATSU, KUBOTA, LIFTMAK UDYOG, LIUGONG, MASSEY FERGUSON, MELROE, MESSERSI, MUSTANG, NEW HOLLAND, PRIDE OF INDIA, RACOON, SCAT TRACK, SHERPA, SKYTRAK, SPACK, SUNDARAM, SUNWARD, SUSUMO, TAKEUCHI, TCM, TEREX, THOMAS, TORO, TOYOTA, VERMEER, VOLVO, WACKER NEUSON, YANMAR. With such a wide selection of used skid steer loaders to choose from, you are guaranteed to find the one that is right for you and your business.
 For sale is a 2005 Caterpillar 304CR Excavator, Cab/Heat/Air, Aux Hydraulics, Mechanical thumb,2 Speed,  Backfill Blade, VERY GOOD tracks, Cat Coupler, 10,844# Operating weight, 43 HP Diesel engine, 4,221 Hours.  Cranks right up and runs good, Tracks straight, turns strong both directions.  Has some dents/dings/scratches but seems to be mechanically pretty sound.  Cylinders all seem dry.
Skid-steer loaders are typically four-wheel vehicles with the wheels mechanically locked in synchronization on each side, and where the left-side drive wheels can be driven independently of the right-side drive wheels. The wheels typically have no separate steering mechanism and hold a fixed straight alignment on the body of the machine. Turning is accomplished by differential steering, in which the left and right wheel pairs are operated at different speeds, and the machine turns by skidding or dragging its fixed-orientation wheels across the ground. The extremely rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine. As with tracked vehicles, the high ground friction produced by skid steers can rip up soft or fragile road surfaces. They can be converted to low ground friction by using specially designed wheels such as the Mecanum wheel. Skid-steer loaders are capable of zero-radius, "pirouette" turning, which makes them extremely maneuverable and valuable for applications that require a compact, agile loader. Skid-steer loaders are sometimes equipped with tracks instead of the wheels, and such a vehicle is known as a multi-terrain loader.[1]
Excavators (hydraulic) are heavy construction equipment consisting of a boom, dipper (or stick), bucket and cab on a rotating platform known as the "house".[1] The house sits atop an undercarriage with tracks or wheels. They are a natural progression from the steam shovels and often mistakenly called power shovels. All movement and functions of a hydraulic excavator are accomplished through the use of hydraulic fluid, with hydraulic cylinders and hydraulic motors.[2] Due to the linear actuation of hydraulic cylinders, their mode of operation is fundamentally different from cable-operated excavators which use winches and steel ropes to accomplish the movements.[3]

A smart combination of a compact excavator with a compact loader, the MCR range is now available in the 6, 8 and 10-tonne class. Quite simply unique, the 6MCR is a tracked excavator that can travel at speeds of up to 10 km/h, a compact loader with 360° rotation, a construction machine that can switch from excavator mode to skid loader mode in seconds.
Tractor paid for, and loaded on to Kyle’s trailer, I called my wife. After a brief “conversation” about the home renovations all that cash could cover, the tractor was dropped off at Phelps’ garage. Rather than me figuring the machine out, I had Bill give it a once over, replace all the fluids, the few bad hoses, straighten the bent loader bucket, and re-pack that leaky swing arm cylinder. There was a new battery, too, and a few other things, which rung up to $1,500 or $500 more than I had anticipated before I started bidding.
The sheer range of functions they are capable of makes skid steers highly sought after on the used skid steer loader market. Some skid loaders have an automatic attachment changing mechanism. This function allows the driver to change attachments without leaving the cab of the compact loader, as the hydraulic supply line couplings are located adjacent to the cab, and these can be connected or disconnected with ease. Othe skid steer loaders with an extended reach design are capable of a greater operating height and are able to unload into tall receptacles with ease. Skid steer loaders may even be capable of being used as an excavator; this is particularly useful in height restricted work areas where there may not be sufficient clearance for an excavator boom. If you want greater stability and traction in the worst terrain, then you'll want to check out a track skid steer second-hand market.
At that point, I hit tractorhouse.com and tractordata.com to see what the specific models had sold for recently with similar hours. (Hours on tractors are like miles on a car, and are noted with the make and model on most auction listings.) I ran the makes and models through Craigslist, too, and did a general Google search with the terms “for sale” tacked on. A 2015 post on the L3750 on tractorbynet.com without the backhoe and fewer hours went for $13,900. Other posts said $10,000-plus in decent condition and an ad from Pennsylvania with nearly identical hours and no backhoe listed for $13,500. I made a mental note that, if there weren’t any problems with the actual machine, I wouldn’t spend more than $11,000.
×