For sale is a 2005 Caterpillar 304CR Excavator, Cab/Heat/Air, Aux Hydraulics, Mechanical thumb,2 Speed,  Backfill Blade, VERY GOOD tracks, Cat Coupler, 10,844# Operating weight, 43 HP Diesel engine, 4,221 Hours.  Cranks right up and runs good, Tracks straight, turns strong both directions.  Has some dents/dings/scratches but seems to be mechanically pretty sound.  Cylinders all seem dry.

8370R ILS IVT Dlx Cab Active Seat Prem Lights Prem Rad 5 SCV Large Hyd Pump 480R50 Tires and Duals 420R34 Frt Tires and Duals 16 Frt Wts. 1 Pr 1400 Rear Wts 1 Pr 450 Wts Back up alarm Leater Seat Aux. Hyd Power Mirrors Power Guard EPT until 2000 Hrs or 7-10-19.|GOLD KEY EXPERIENCE|3743 kg (8252 lb) Ballast Package with Rear Duals|Back Up Alarm|Auxiliary Hydraulic Connections - 1/2 in.|Cold Weather Start Kit|Foot Operated Speed Control|Ethernet Switch|Leather Comfort Package|Outside Mirrors - Power Telescoping, Heated, Electrically Adjustable Right-hand and Left-hand|Antenna Mount and Wiring for Business Band (2-Way) Radio|Radar, Dual Beam Sensor|420/85R34 147A8 R1W Radial in Dual Wheel Configuration - Eight Position|Premium Lighting|Fenders, Pivoting Front - 480 mm (18.9 in.) Wide|Fenders, Rear Extensions 2.55 m (100 in.) Width|480/80R50 159A8 R1W Radial in Dual Wheel Configuration|Firestone Brand Only|ILS with hydraulic differential lock, fully-enclosed driveline and Group 48 Rear Tires|120 mm (4.72 in.) diameter by 3010 mm (118.5 in.) length with Double Taper Wheel Hubs|9,072 kg (20,000 lb) capactiy 3-Point Hitch (Cat 4N/3) Hitch with Sway Blocks and Quik-Coupler|Category 4 adjustable Swinging Drawbar with 50 mm (2 in.) Pin with heavy duty support|Five Premium Rear Remote SCVs with Electrohydraulic (EH) Controls, Premium Couplers, and High Pressure Relief Levers|45 mm (1-3/4 in.) 1,000 rpm (20-spline) PTO|Performance Package|AutoPowr Infinitely Variable Transmission (IVT) 42 km/h (26 mph)|4600 CommandCenter|4600 Processor|Premium CommandView III Cab with ActiveSeat|Premium Radio Package with XM Radio|Right-hand Reverser Linear-Type Transmission Controls|John Deere PowerTech 9.0 L (549 cu. in.) 6 Cylinder Tier 4/Stage V Compliant Diesel Engine|321 L/min (85 gpm) Dual Hydraulic Pump ...more
* Rates as low as 0% for 72 months in the U.S. and 0% for 84 months in Canada. Offer valid on select models and subject to credit review and approval through AGCO Finance LLC. Dealer participation may vary. Contact your participating dealer for more details. Offer subject to change without notice. Full list of qualifying products can be found here.
Some of the biggest names in the world produce skid steer loaders, including Bobcat, New Holland and Kubota. Consider a Boxer mini skid for domestic and small-scale applications, or invest in a powerful John Deere or Caterpillar loader for commercial use.  Even if you choose to buy a second-hand machine, you have the peace of mind that comes from knowing you have bought something built to last.
If your personal piece of heaven is between one and five acres, your plans can quickly outgrow the capabilities of ordinary yard tractors or lawn and garden tractors. When you need to haul dirt and mulch, mow acres of grass, till a garden or plow snow, a versatile Boomer™ 24 compact tractor can power all the implements you'll need and more. The Boomer 24 is a small tractor, but it can accomplish big things, making it the best compact tractor for the money.
Every Certified Pre-Owned Tractor, Combine and now Self-Propelled Sprayer is covered by a comprehensive PowerGard™ plan, giving you the coverage benefits of new with the extra value of pre-owned. Right now, no one else offers a low-hour machine that’s been field tested, inspected and certified on over 170 points for tractors and 200 points on combines and sprayers. Add to that a free one-year JDLink™ Connect subscription, and a John Deere Certified Pre-Owned machine deserves even more of your attention.
2008 Case IH Farmall 95 MFWD Tractor W/Loader, 575 Hrs Showing, FPT Turbocharged And Intercooled 4-Cyl, Diesel, Water Cooled Engine, 12 Forward Speeds, 540 PTO, Small 1000 PTO, Heater, AC, Radio, 320/85R24 Front Tires, 18.4-30 Rear Tires, 2 Wheel Steering, 3 Point Hitch, Block Heater, Additional Lighting Package With Beacon Light, 2 Auxiliary Hydraulics, 2 Doors, 12 Reverse Speeds, Rear PTO Location Axle(S), Mechanical Shuttle Shift Transmission *Includes* 2009 Model L730 Quick Attach Loader SN: Y9WLE4212, Quick Attach Mid Mounted Hydraulic Block, Live Hydraulic Joystick, Third Function For Grapple, 8 Foot Bucket, Standard Skid Loader Quick Attach Mount For Bucket, SN: Z8JP51190 ...more
 For sale is a 2005 Caterpillar 304CR Excavator, Cab/Heat/Air, Aux Hydraulics, Mechanical thumb,2 Speed,  Backfill Blade, VERY GOOD tracks, Cat Coupler, 10,844# Operating weight, 43 HP Diesel engine, 4,221 Hours.  Cranks right up and runs good, Tracks straight, turns strong both directions.  Has some dents/dings/scratches but seems to be mechanically pretty sound.  Cylinders all seem dry.
Hydraulic excavator capabilities have expanded far beyond excavation tasks with buckets. With the advent of hydraulic-powered attachments such as a breaker, a grapple or an auger, the excavator is frequently used in many applications other than excavation. Many excavators feature a quick coupler for simplified attachment mounting, increasing the machine's utilization on the jobsite. Excavators are usually employed together with loaders and bulldozers. Most wheeled, compact and some medium-sized (11 to 18-tonne) excavators have a backfill (or dozer) blade. This is a horizontal bulldozer-like blade attached to the undercarriage and is used for levelling and pushing removed material back into a hole.
The two main sections of an excavator are the undercarriage and the house. The undercarriage includes the blade (if fitted), tracks, track frame, and final drives, which have a hydraulic motor and gearing providing the drive to the individual tracks. The house includes the operator cab, counterweight, engine, fuel and hydraulic oil tanks. The house attaches to the undercarriage by way of a center pin. High pressure oil is supplied to the tracks' hydraulic motors through a hydraulic swivel at the axis of the pin, allowing the machine to slew 360° unhindered.[8]
Compare the John Deere compact tractors that we have for sale here at TriGreen Equipment. Talk to us today to get help finding the perfect tractor for you. With our outstanding selection and 19 locations across Alabama, Tennessee and Mississippi, we're bound to have something that meets your needs. We also provide consistent customer service that sets us apart from any other equipment dealer and not only keeps us invested in our customers but keeps our customers invested in TriGreen Equipment.
A skid-steer loader can sometimes be used in place of a large excavator by digging a hole from the inside. The skid loader first digs a ramp leading to the edge of the desired excavation. It then uses the ramp to carry material out of the hole. The skid loader reshapes the ramp making it steeper and longer as the excavation deepens. This method is particularly useful for digging under a structure where overhead clearance does not allow for the boom of a large excavator, such as digging a basement under an existing house. Several companies make backhoe attachments for skid-steers. These are more effective for digging in a small area than the method above and can work in the same environments. Other applications may consist of transporting raw material around a job site, or assisting in the rough grading process.

Hydraulic excavator capabilities have expanded far beyond excavation tasks with buckets. With the advent of hydraulic-powered attachments such as a breaker, a grapple or an auger, the excavator is frequently used in many applications other than excavation. Many excavators feature a quick coupler for simplified attachment mounting, increasing the machine's utilization on the jobsite. Excavators are usually employed together with loaders and bulldozers. Most wheeled, compact and some medium-sized (11 to 18-tonne) excavators have a backfill (or dozer) blade. This is a horizontal bulldozer-like blade attached to the undercarriage and is used for levelling and pushing removed material back into a hole.
ENGINE,(4JG1T-ISUZU) 81HP,3.059|LIGHTING, INTERIOR & WORK|AUXILIARY HYDRAULICS 19.8G|OROPS /EPA LABEL / AMICS|6567 / 08/01/18|SEAT,STANDARD W/BELT (WORN)|2 SPEED TRAVEL / PILOT CONTROL|ULTRA LOW SULFUR DIESEL FUEL|HEATER / DEFROSTER|HYDRAULICS, STANDARD FLOW|2007 GEHL CTL70 TRACK LOADER|AS IS / AS RECEIVED|BUCKET-GP, 76" W/EDGE|TRACKS, 18, 20/32 TREADS| ...more
There are two main types of "Control" configuration generally use in excavators to control the boom and bucket, both of which spread the four main digging controls between two x-y joysticks. This allows a skilled operator to control all four functions simultaneously. The most popular configuration in the US is the SAE controls configuration while in other parts of the world, the ISO control configuration is more common. Some manufacturers such as Takeuchi have switches that allow the operator to select which control configuration to use.
*Offer valid between 1 April 2019 and 31 October 2019 on qualified new equipment1 and is subject to approval by John Deere Financial. For agricultural and commercial use only. Advanced lease payment may be required.  Average advanced lease payment is 10% of total sales price.  Customers may upgrade from a canopy to a cab for an additional $50 (USD) per month.  Taxes, freight, set up and delivery charges are not included and could increase monthly payment. Payments may vary based upon the end of lease term purchase option price and length of lease term.  Available at participating U.S. dealers. Price and model availability may vary by dealer. Prices and savings in U.S.
The two main sections of an excavator are the undercarriage and the house. The undercarriage includes the blade (if fitted), tracks, track frame, and final drives, which have a hydraulic motor and gearing providing the drive to the individual tracks. The house includes the operator cab, counterweight, engine, fuel and hydraulic oil tanks. The house attaches to the undercarriage by way of a center pin. High pressure oil is supplied to the tracks' hydraulic motors through a hydraulic swivel at the axis of the pin, allowing the machine to slew 360° unhindered.[8]
1979 International 1086 2WD Tractor W/ Loader, 3,125 Hrs Showing, IH 415CI/6.8L Turbo Diesel, 8-Speed Transmission, Factory No TA, 540/1000 PTO, CAT III 3-Point Hitch, 3 Remotes, IH 2350 Loader With 7' Grapple Bucket, Wiring Harness Installed (Unknown Implement), AM/FM Cassette Stereo, NOTE: Some Grapple Forks Bent (See Pictures), SN: 2610181U39124 ...more

There’s also a cost in getting a tractor home. If you own a big trailer, this isn’t a concern, but if you don’t – and live far away from the auction yard – that bill can run a few hundred dollars. Kyle volunteered to haul whatever I bought the hour south to my place. So, with the repairs plus transport, I wagered the Kubota would cost $1,000 above what I bought it for. My new high price was $10,000 and, frankly, I thought it would go for a lot more than that.
×