1994 John Deere 4960 MFWD Tractor, 180.6 Hrs Showing, 222 Hp, 7.6 L 6 Cylinder Turbocharged Diesel Engine, Powershift 15 Forward & 4 Reverse Gears, AC/Heat, AM/FM Radio, 3 Rear Sets Of Hydraulic Remotes, 3 Point, Draw Bar Hitch, Clevis Hitch, Large 1000 PTO, 14 Front Suitcase Weights, Rear Inner Weights, Rear Duals, Firestone Tires Front 16.9-30, Rear Tires 18.4R46, SN: RW4960P008173 ...more
Komatsu technology and innovation is shaping the future of construction equipment. Our latest version of KOMTRAX provides advanced remote monitoring that helps keep your machine running at peak efficiency. Troubleshooting can be performed remotely and detailed machine operating information can help trim owning and operating costs. Our intelligent excavator lineup includes a fully integrated machine control and guidance system that improves work efficiency by reducing material waste and job-site resources.
If your personal piece of heaven is between one and five acres, your plans can quickly outgrow the capabilities of ordinary yard tractors or lawn and garden tractors. When you need to haul dirt and mulch, mow acres of grass, till a garden or plow snow, a versatile Boomer™ 24 compact tractor can power all the implements you'll need and more. The Boomer 24 is a small tractor, but it can accomplish big things, making it the best compact tractor for the money.
2008 Case IH Farmall 95 MFWD Tractor W/Loader, 575 Hrs Showing, FPT Turbocharged And Intercooled 4-Cyl, Diesel, Water Cooled Engine, 12 Forward Speeds, 540 PTO, Small 1000 PTO, Heater, AC, Radio, 320/85R24 Front Tires, 18.4-30 Rear Tires, 2 Wheel Steering, 3 Point Hitch, Block Heater, Additional Lighting Package With Beacon Light, 2 Auxiliary Hydraulics, 2 Doors, 12 Reverse Speeds, Rear PTO Location Axle(S), Mechanical Shuttle Shift Transmission *Includes* 2009 Model L730 Quick Attach Loader SN: Y9WLE4212, Quick Attach Mid Mounted Hydraulic Block, Live Hydraulic Joystick, Third Function For Grapple, 8 Foot Bucket, Standard Skid Loader Quick Attach Mount For Bucket, SN: Z8JP51190 ...more
2014 Bobcat S570 Skid Steer, 1,458 Hrs Showing, Bobcat 4 Cylinder 2.4L Diesel Engine, Model D24NAP, Air Cooled, Block Heater, 2 Speed Hydrostat, Bob-Tach, 1950 Lbs Rated Capacity, 4 Front Auxiliary Hydraulics, Hydraulic Float, Hand And Foot Controls, 10-16.5NHS Tires, Cab, Heat, A/C, AM/FM Radio, Quick Attach, NOTE: Bucket Has Damage (Shown In Pics) AC Doesn’T Work, Left Rear Tire Has Tube, SN: ALM411042 ...more

The Kubota ran tip-top for three months when a short blew the ignition switch. Horsing around with it I blew the starter. That was an easy fix, but another $250 in the hole. When the backhoe came off, I needed to buy 3-point arms, another $250. A year later, with all the other miscellaneous purchases, most not really needed, I probably have about $11,500 in the Kubota, which for a 45-horse with backhoe, really isn’t bad at all. If I ever need to sell it, I wouldn’t take much less than $15,000. Not that that’s going to happen anytime soon. I haven’t found much on our small property the tractor won’t do: snow removal, firewood, food plots, our big garden, cutting trails in the woods, dragging logs to be milled into lumber.


No matter what line of work you're in, Cat excavators will make you plenty of money. You can count on these machines to deliver top performance, unmatched versatility, and the industry's best fuel efficiency—guaranteed. You'll also love their ease of operation, their durability, and their latest safety and technology features that will make you the model of productivity (and the envy of your competitors). Plus Cat excavators are down-right easy to maintain. If you want to make more money for you and your family, check out our family of Cat excavators. You won't find a better, more comprehensive lineup of machines built just for your unique business needs.

SANY hydraulic excavators are precision-engineered digging tools built with industry-leading technology and highest-grade components to offer you maximum job site productivity. Our engines deliver top performance and tremendous power, with increased fuel efficiency and low emissions. Multiple working modes, intelligent control systems and a variety of attachments and parts allow versatile operation in all kinds of work environments. Whether it’s mining, road building, civil engineering, or general construction, SANY excavators are ready and able to get the job done.
I was happy with my $9,000 purchase price, if not a little stunned. Except for our house, which was only possible thanks to a big mortgage, this was the largest single purchase I’d ever made. More than my truck. More than my wife’s car. But auction houses charge additional fees that you need to be mindful of. At the auction I attended, the buyer’s fee was 10 percent for total sales under $1,000 and 1 percent for sales above $1,000. Credit card payments were an additional 2 percent, which I was OK with because I got the equivalent of 3 percent cash back in points and had the dinero to pay it right off – thanks to months of tight living.
The Melroe brothers, of Melroe Manufacturing Company in Gwinner, North Dakota, purchased the rights to the Keller loader in 1958 and hired the Kellers to continue refining their invention. As a result of this partnership, the M-200 Melroe self-propelled loader was introduced at the end of 1958. It featured two independent front-drive wheels and a rear caster wheel, a 12.9 hp (9.6 kW) engine and a 750-pound (340 kg) lift capacity. Two years later they replaced the caster wheel with a rear axle and introduced the M-400, the first four-wheel, true skid-steer loader.[2] The M-440 was powered by a 15.5 hp (11.6 kW) engine and had an 1,100-pound (500 kg) rated operating capacity. Skid-steer development continued into the mid-1960s with the M600 loader.
Thanks to a simple selector-switch, Mecalac patent, the driver can turn his compact excavator into a compact loader and then back again, using the same commands. Loading efficiency is maximized, it is made by the skid bucket supported on the blade which increases the machine’s efficiency thanks to the force of the thrust transmitted directly from the chassis to the bucket. The operation is performed more accurately using the control lever. The patented Mecalac cylinder coupling function, allows to synchronize the boom cylinders for perfect movement coordination and precision. It makes driving and handling easy, regardless of whether the operator is a novice or more experienced. And, whether engaged or otherwise, they’re yet another powerful feature along for the ride.

Excavators (hydraulic) are heavy construction equipment consisting of a boom, dipper (or stick), bucket and cab on a rotating platform known as the "house".[1] The house sits atop an undercarriage with tracks or wheels. They are a natural progression from the steam shovels and often mistakenly called power shovels. All movement and functions of a hydraulic excavator are accomplished through the use of hydraulic fluid, with hydraulic cylinders and hydraulic motors.[2] Due to the linear actuation of hydraulic cylinders, their mode of operation is fundamentally different from cable-operated excavators which use winches and steel ropes to accomplish the movements.[3]
The first three-wheeled, front-end loader was invented by brothers Cyril and Louis Keller in Rothsay, Minnesota, in 1957.[2] The Kellers built the loader to help a farmer, Eddie Velo, mechanize the process of cleaning turkey manure from his barn. The light and compact machine, with its rear caster wheel, was able to turn around within its own length, while performing the same tasks as a conventional front-end loader.[2]

Compact tractors are just like other tractors in that they can be used with a variety of different attachments that have various purposes in agricultural and construction situations. Unlike other tractors, however, compact tractors weigh under 4,000 pounds, and they use less than 40 HP, with many using only 20 HP to 30 HP. These specialized tractors run at less than 540 RPM, and they are easier to store and maneuver than traditional tractors.


The Kubota was definitely not pretty. It had clearly spent its life sleeping outside. I tried to start it and nothing happened. But when Kyle brought over a jump pack it started right up. Right away it would need a battery. We started to make a list: battery, leaky swing arm on the backhoe, the filters were all old – one of them dated 2010 – two hydraulic hoses needed replacement … I Googled parts and prices on my cell phone before the bidding started. Those replacements, plus all new fluids I figured would take another $1,000 ballpark to get the machine back to level.
×