ENGINE,(4JG1T-ISUZU) 81HP,3.059|LIGHTING, INTERIOR & WORK|AUXILIARY HYDRAULICS 19.8G|OROPS /EPA LABEL / AMICS|6567 / 08/01/18|SEAT,STANDARD W/BELT (WORN)|2 SPEED TRAVEL / PILOT CONTROL|ULTRA LOW SULFUR DIESEL FUEL|HEATER / DEFROSTER|HYDRAULICS, STANDARD FLOW|2007 GEHL CTL70 TRACK LOADER|AS IS / AS RECEIVED|BUCKET-GP, 76" W/EDGE|TRACKS, 18, 20/32 TREADS| ...more
The Kubota ran tip-top for three months when a short blew the ignition switch. Horsing around with it I blew the starter. That was an easy fix, but another $250 in the hole. When the backhoe came off, I needed to buy 3-point arms, another $250. A year later, with all the other miscellaneous purchases, most not really needed, I probably have about $11,500 in the Kubota, which for a 45-horse with backhoe, really isn’t bad at all. If I ever need to sell it, I wouldn’t take much less than $15,000. Not that that’s going to happen anytime soon. I haven’t found much on our small property the tractor won’t do: snow removal, firewood, food plots, our big garden, cutting trails in the woods, dragging logs to be milled into lumber.
I was happy with my $9,000 purchase price, if not a little stunned. Except for our house, which was only possible thanks to a big mortgage, this was the largest single purchase I’d ever made. More than my truck. More than my wife’s car. But auction houses charge additional fees that you need to be mindful of. At the auction I attended, the buyer’s fee was 10 percent for total sales under $1,000 and 1 percent for sales above $1,000. Credit card payments were an additional 2 percent, which I was OK with because I got the equivalent of 3 percent cash back in points and had the dinero to pay it right off – thanks to months of tight living.
On the end of the stick is usually a bucket. A wide, large capacity (mud) bucket with a straight cutting edge is used for cleanup and levelling or where the material to be dug is soft, and teeth are not required. A general purpose (GP) bucket is generally smaller, stronger, and has hardened side cutters and teeth used to break through hard ground and rocks. Buckets have numerous shapes and sizes for various applications. There are also many other attachments which are available to be attached to the excavator for boring, ripping, crushing, cutting, lifting, etc. Excavators in Scandinavia often feature a tiltrotator which allows attachments rotate 360 degrees and tilt +/- 45 degrees, in order to increase the flexibility and precision of the excavator.
1Qualified equipment includes either a 314G or 318G canopy unit with 10”x16.5” tires, 2” seat belt, and 66” construction bucket. Example based on a 314G lease of $30,076 with a 10% advanced lease payment, monthly payment $379 for 36 months; or a 318G lease of $32,516 with a 10% advanced lease payment, monthly payment $399 for 36 months. Lease terms include 600 hours per year. For an additional $50 per month (USD), customers can upgrade to a 314G or 318G with a cab.
Excavators typically feature a boom and arm, equipped with a bucket attachment that is used for digging. Unlike its cousin, the Mini Excavator, these units typically feature an enclosed cab for the operator; and have the ability to dig at greater depths and distances from the machine. While these units are typically tracked, IronPlanet sells Wheel Excavators as well. Browse popular models from top manufacturers including Cat Excavators, Hitachi Excavators, John Deere Excavators, Komatsu Excavators, Volvo Excavators and others. Be sure to check out our Excavator Attachments for your chance at a new bucket or thumb.
Compact tractors are just like other tractors in that they can be used with a variety of different attachments that have various purposes in agricultural and construction situations. Unlike other tractors, however, compact tractors weigh under 4,000 pounds, and they use less than 40 HP, with many using only 20 HP to 30 HP. These specialized tractors run at less than 540 RPM, and they are easier to store and maneuver than traditional tractors.
Knowing how much tractor you need is a separate problem all together. The answer depends on the work you intend to do. What implements will it pull? Is the main job brush hogging an established pasture or finish-cutting a lawn? Do you need tires that won’t trash the yard or more aggressive treads and 4-wheel drive so it won’t get bogged down in the woods? I was after a 30-to 50-horse machine with 4-wheel drive, and a frontend loader. Because much of my land is forest that I’m clearing for food plots and pasture, I wanted something heavy enough to take a beating and pull an 8-foot tiller or brush hog.
1978 International 1586 2WD Tractor, 6,417 Hrs Showing, IH 436CI/7.1L 6-Cylinder Turbo Diesel, 6-Speed Transmission W/2-Speed TA, Planetary Final Drive, 540/1000 PTO, CAT III 3-Point Hitch, 3 Remotes, 12 Suitcase Weights On Front, 2 Sets Rear Axle Weights, 20.8R38 Rear Dual Tires, Hydraulic Seat, AM/FM 8-Track Stereo, NOTE: Key Broken Off In Ignition, Only One Battery Installed (See Pictures), SN: 2650151U15794 ...more
* Rates as low as 0% for 72 months in the U.S. and 0% for 84 months in Canada. Offer valid on select models and subject to credit review and approval through AGCO Finance LLC. Dealer participation may vary. Contact your participating dealer for more details. Offer subject to change without notice. Full list of qualifying products can be found here.
1942 Farmall H Tractor , Starts and runs good, good tires, PTO works, Belt Drive pulley works, converted to 12 volt, lights work, good seat. Will deliver for $2.00 per mile from Texarkana, TX 75503, first 100 miles free. Payment by Paypal , cashiers check or cash. Will accept personal check but must wait for check to clear before loading or shipping.