used john deere tractors

The Melroe brothers, of Melroe Manufacturing Company in Gwinner, North Dakota, purchased the rights to the Keller loader in 1958 and hired the Kellers to continue refining their invention. As a result of this partnership, the M-200 Melroe self-propelled loader was introduced at the end of 1958. It featured two independent front-drive wheels and a rear caster wheel, a 12.9 hp (9.6 kW) engine and a 750-pound (340 kg) lift capacity. Two years later they replaced the caster wheel with a rear axle and introduced the M-400, the first four-wheel, true skid-steer loader.[2] The M-440 was powered by a 15.5 hp (11.6 kW) engine and had an 1,100-pound (500 kg) rated operating capacity. Skid-steer development continued into the mid-1960s with the M600 loader.
Some models of skid steer now also have an automatic attachment changer mechanism. This allows a driver to change between a variety of terrain handling, shaping, and leveling tools without having to leave the machine, by using a hydraulic control mechanism to latch onto the attachments. Hydraulic supply lines to powered attachments may be routed so that the couplings are located near the cab, and the driver does not need to leave the machine to connect or disconnect those supply lines.
Skid-steer loaders are typically four-wheel vehicles with the wheels mechanically locked in synchronization on each side, and where the left-side drive wheels can be driven independently of the right-side drive wheels. The wheels typically have no separate steering mechanism and hold a fixed straight alignment on the body of the machine. Turning is accomplished by differential steering, in which the left and right wheel pairs are operated at different speeds, and the machine turns by skidding or dragging its fixed-orientation wheels across the ground. The extremely rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine. As with tracked vehicles, the high ground friction produced by skid steers can rip up soft or fragile road surfaces. They can be converted to low ground friction by using specially designed wheels such as the Mecanum wheel. Skid-steer loaders are capable of zero-radius, "pirouette" turning, which makes them extremely maneuverable and valuable for applications that require a compact, agile loader. Skid-steer loaders are sometimes equipped with tracks instead of the wheels, and such a vehicle is known as a multi-terrain loader.[1]
22HP and 25HP sub-compact 4WD tractors powered with fuel-efficient engines with 2 range Hydrostatic transmission. Sub-compact chassis allows maneuvering in small, confined spaces and are designed for maximum versatility with available front end loader, mid-mount mower and backhoe--all of which can be attached to the tractor at the same time. These tractors are tailored for small landowners, horse stall owners and commercial users. Each model includes more standard features and boasts superior performance at a lower price than the competition.
Komatsu technology and innovation is shaping the future of construction equipment. Our latest version of KOMTRAX provides advanced remote monitoring that helps keep your machine running at peak efficiency. Troubleshooting can be performed remotely and detailed machine operating information can help trim owning and operating costs. Our intelligent excavator lineup includes a fully integrated machine control and guidance system that improves work efficiency by reducing material waste and job-site resources.

Skid-steer loaders are typically four-wheel vehicles with the wheels mechanically locked in synchronization on each side, and where the left-side drive wheels can be driven independently of the right-side drive wheels. The wheels typically have no separate steering mechanism and hold a fixed straight alignment on the body of the machine. Turning is accomplished by differential steering, in which the left and right wheel pairs are operated at different speeds, and the machine turns by skidding or dragging its fixed-orientation wheels across the ground. The extremely rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine. As with tracked vehicles, the high ground friction produced by skid steers can rip up soft or fragile road surfaces. They can be converted to low ground friction by using specially designed wheels such as the Mecanum wheel. Skid-steer loaders are capable of zero-radius, "pirouette" turning, which makes them extremely maneuverable and valuable for applications that require a compact, agile loader. Skid-steer loaders are sometimes equipped with tracks instead of the wheels, and such a vehicle is known as a multi-terrain loader.[1]
A robotic mower is an autonomous mower that operates within a defined set of boundaries to mow a yard. Wire boundaries frame the desired mow area (the yard) and the robotic mower operates continuously within that area, mowing the lawn until you turn it off. They are generally designed for smaller areas, but some newer models are showing increased mow area capabilities. They are awesome if you don’t have the time (or desire) to do it yourself.

On the end of the stick is usually a bucket. A wide, large capacity (mud) bucket with a straight cutting edge is used for cleanup and levelling or where the material to be dug is soft, and teeth are not required. A general purpose (GP) bucket is generally smaller, stronger, and has hardened side cutters and teeth used to break through hard ground and rocks. Buckets have numerous shapes and sizes for various applications. There are also many other attachments which are available to be attached to the excavator for boring, ripping, crushing, cutting, lifting, etc. Excavators in Scandinavia often feature a tiltrotator which allows attachments rotate 360 degrees and tilt +/- 45 degrees, in order to increase the flexibility and precision of the excavator.
Can you dig it? Add an excavator to your repertoire and you have the hydraulic-powered muscle to tackle an incredible range of tasks. These powerful machines, manufactured by the likes of Caterpillar and Bobcat, make short work of trench-digging and forestry work, and by shopping the huge inventory on eBay you have the opportunity to pick a make and model that fits your requirements and budget. 

For those seeking a micro-excavator for urban or residential work, the Bobcat 325G track excavator offers the ability to perform excavation work in tight areas. Powered by a 27.7 horsepower Kubota diesel motor, the 325G is biased toward smaller excavation work like irrigation trenching, digging out smaller pools, and excavating pads for small structures.
No over-digging. No undercutting. No wasted time, fuel or dollars. SiteControl helps eliminate rework by making reliable, repeatable precision a reality. CASE offers tailor-made hardware and software solutions for all positioning and measuring tasks in construction, including ways for businesses to improve productivity and lower costs – both on and off your machine.
One solution does not fit all. CASE carefully considered each machine’s application, life expectancy, maintenance needs and operators. That’s why every CASE skid steer loader features a proven Tier 4 Final solution that is tailored for that model. CASE Tier 4-certified equipment is easier to maintain and, unlike competitive models, won't require you to master additional maintenance procedures. In fact, most CASE machines have maintenance-free emission solutions, so you can stay focused on your work—and not maintaining your machine.
1942 Farmall H Tractor , Starts and runs good, good tires, PTO works, Belt Drive pulley works, converted to 12 volt, lights work, good seat. Will deliver for $2.00 per mile from Texarkana, TX 75503, first 100 miles free.  Payment by Paypal , cashiers check or cash. Will accept personal check but must wait for check to clear before loading or shipping.
×