used john deere tractors

Compact tractors are just like other tractors in that they can be used with a variety of different attachments that have various purposes in agricultural and construction situations. Unlike other tractors, however, compact tractors weigh under 4,000 pounds, and they use less than 40 HP, with many using only 20 HP to 30 HP. These specialized tractors run at less than 540 RPM, and they are easier to store and maneuver than traditional tractors.
You use of this website constitutes and manifests your acceptance of our User Agreement, Privacy Policy, Cookie Policy, and awareness of the California Privacy Rights. Pursuant to U.S. Copyright law, as well as other applicable federal and state laws, the content on this website may not be reproduced, distributed, displayed, transmitted, cached, or otherwise used, without the prior, express, and written permission of Athlon Outdoors.
I was happy with my $9,000 purchase price, if not a little stunned. Except for our house, which was only possible thanks to a big mortgage, this was the largest single purchase I’d ever made. More than my truck. More than my wife’s car. But auction houses charge additional fees that you need to be mindful of. At the auction I attended, the buyer’s fee was 10 percent for total sales under $1,000 and 1 percent for sales above $1,000. Credit card payments were an additional 2 percent, which I was OK with because I got the equivalent of 3 percent cash back in points and had the dinero to pay it right off – thanks to months of tight living.
22HP and 25HP sub-compact 4WD tractors powered with fuel-efficient engines with 2 range Hydrostatic transmission. Sub-compact chassis allows maneuvering in small, confined spaces and are designed for maximum versatility with available front end loader, mid-mount mower and backhoe--all of which can be attached to the tractor at the same time. These tractors are tailored for small landowners, horse stall owners and commercial users. Each model includes more standard features and boasts superior performance at a lower price than the competition.
ENGINE,(4JG1T-ISUZU) 81HP,3.059|LIGHTING, INTERIOR & WORK|AUXILIARY HYDRAULICS 19.8G|OROPS /EPA LABEL / AMICS|6567 / 08/01/18|SEAT,STANDARD W/BELT (WORN)|2 SPEED TRAVEL / PILOT CONTROL|ULTRA LOW SULFUR DIESEL FUEL|HEATER / DEFROSTER|HYDRAULICS, STANDARD FLOW|2007 GEHL CTL70 TRACK LOADER|AS IS / AS RECEIVED|BUCKET-GP, 76" W/EDGE|TRACKS, 18, 20/32 TREADS| ...more
Unlike in a conventional front loader, the lift arms in these machines are alongside the driver with the pivot points behind the driver's shoulders. Because of the operator's proximity to moving booms, early skid loaders were not as safe as conventional front loaders, particularly during entry and exit of the operator. Modern skid loaders have fully enclosed cabs and other features to protect the operator. Like other front loaders, it can push material from one location to another, carry material in its bucket or load material into a truck or trailer.
A smart combination of a compact excavator with a compact loader, the MCR range is now available in the 6, 8 and 10-tonne class. Quite simply unique, the 6MCR is a tracked excavator that can travel at speeds of up to 10 km/h, a compact loader with 360° rotation, a construction machine that can switch from excavator mode to skid loader mode in seconds.
2014 Bobcat S570 Skid Steer, 1,458 Hrs Showing, Bobcat 4 Cylinder 2.4L Diesel Engine, Model D24NAP, Air Cooled, Block Heater, 2 Speed Hydrostat, Bob-Tach, 1950 Lbs Rated Capacity, 4 Front Auxiliary Hydraulics, Hydraulic Float, Hand And Foot Controls, 10-16.5NHS Tires, Cab, Heat, A/C, AM/FM Radio, Quick Attach, NOTE: Bucket Has Damage (Shown In Pics) AC Doesn’T Work, Left Rear Tire Has Tube, SN: ALM411042 ...more
Before the 1990s, all excavators had a long or conventional counterweight that hung off the rear of the machine to provide more digging force and lifting capacity. This became a nuisance when working in confined areas. In 1993 Yanmar launched the world's first Zero Tail Swing excavator,[9] which allows the counterweight to stay inside the width of the tracks as it slews, thus being safer and more user friendly when used in a confined space. This type of machine is now widely used throughout the world.

A smart combination of a compact excavator with a compact loader, the MCR range is now available in the 6, 8 and 10-tonne class. Quite simply unique, the 6MCR is a tracked excavator that can travel at speeds of up to 10 km/h, a compact loader with 360° rotation, a construction machine that can switch from excavator mode to skid loader mode in seconds.
2014 NorTrac 25XT Compact Utility Tractor, 80 Hours, 25 hp Tier-4 Final Shibaura Liquid Cooled Diesel Engine, 21.6 Rear PTO hp, R4 Tires, MFWD, Differential Lock, 8 forward and 8 reverse speed transmission with a Synchro-shuttle upgrade, 540/1,000 RPM PTO, ROPS, sunshade and upgraded Grammer suspension seat, Front weights, Rear Hydraulics with 3rd SCV, Glow plugs, 3-pt NorTrac 60" Grooming Mower, Very clean. ...more
The first three-wheeled, front-end loader was invented by brothers Cyril and Louis Keller in Rothsay, Minnesota, in 1957.[2] The Kellers built the loader to help a farmer, Eddie Velo, mechanize the process of cleaning turkey manure from his barn. The light and compact machine, with its rear caster wheel, was able to turn around within its own length, while performing the same tasks as a conventional front-end loader.[2]
36" 6500 BELTS, 5 HYD, ACS, PREM RADIO, PREM LIGHTS, POLY MID ROLLERS, ELE MIRRORS, LEATHER, 10 TOUCH SCREEN, RH/LH BEACON LIGHTS, REFRIGERATOR, GREASEABLE STEERING PINS, RADAR, PREM CAB W/ SUSPENSION LIKE NEW WTY TILL APR''18. We have several more of this same model in stock at our 20 Deere locations. We trade for equipment every day so call to see what''s new and not yet online. We trade nationwide and our own fleet of trucks will deliver directly to your farm.|English Operator''s Manual|e18 Transmission, 18 F/6 R Speeds with Efficiency Manager|Single10 In. CommandCenter Display|John Deere ActiveCommand Steering (ACS)|4600 Processor|Premium CommandView III Cab with Cab Suspension|Premium Radio Package with XM Radio|Cummins QSX15 14.9L (912 cu. In.) 6 Cyl. Tier 4 / Stage 4 Compliant Diesel Engine|219 L/Min (58 gpm) Single Hydraulic Pump|Five Rear Remote Selective Control Valves with Electro-Hydraulic Controls (Single Hydraulic Pump Hydraulic System)|Cat. 5 Drawbar (2 position) with Heavy-Duty Drawbar Support with 70mm (2.75 In.) Pin|Polyurethane Mid-Rollers|914 mm (36 In.) Width, 208 mm (8.2 In.) Pitch Camoplast Durabuilt 6500 Tracks with Duradrive Technology|Fixed 2218 mm (87.32 In.) Spacing|Premium Lighting|Ethernet Switch R4|Leather Comfort Package|Outside Mirrors, Power Telescoping, Heated, Electrically Adjustable, RH and LH|Radar, Dual Beam Sensor|Antenna Mount and Wiring for Business Band Radio|Actively Cooled Refrigeration Unit 6.4 L³ (391 cu. in.)|Greaseable Steering Cylinder Pins|installed AT on GEN4 ...more

* Rates as low as 0% for 72 months in the U.S. and 0% for 84 months in Canada. Offer valid on select models and subject to credit review and approval through AGCO Finance LLC. Dealer participation may vary. Contact your participating dealer for more details. Offer subject to change without notice. Full list of qualifying products can be found here.


One solution does not fit all. CASE carefully considered each machine’s application, life expectancy, maintenance needs and operators. That’s why every CASE skid steer loader features a proven Tier 4 Final solution that is tailored for that model. CASE Tier 4-certified equipment is easier to maintain and, unlike competitive models, won't require you to master additional maintenance procedures. In fact, most CASE machines have maintenance-free emission solutions, so you can stay focused on your work—and not maintaining your machine.
Bobcat Company invented the world’s first skid-steer loader. Bobcat has celebrated a 50-year history of quality, performance and reliability. It’s no wonder they’re the world’s best selling skid-steer loader. When paired with a genuine Bobcat® attachment, each skid-steer model is a force to be reckoned with on your jobsite. And with more than a dozen models to choose from, you’ll find the right machine for any size job.

Operate the skid steer loader the way you like through the simple touch of a button on our EZ-EH controls. Quickly switch between personalized settings for speed and control customization; program up to nine different presets to recall operator settings for different jobs and different operators at the touch of a button. There’s also an intuitive lockout menu and rocker switch to easily alternate between CASE “H” and “ISO” patterns.

The Melroe brothers, of Melroe Manufacturing Company in Gwinner, North Dakota, purchased the rights to the Keller loader in 1958 and hired the Kellers to continue refining their invention. As a result of this partnership, the M-200 Melroe self-propelled loader was introduced at the end of 1958. It featured two independent front-drive wheels and a rear caster wheel, a 12.9 hp (9.6 kW) engine and a 750-pound (340 kg) lift capacity. Two years later they replaced the caster wheel with a rear axle and introduced the M-400, the first four-wheel, true skid-steer loader.[2] The M-440 was powered by a 15.5 hp (11.6 kW) engine and had an 1,100-pound (500 kg) rated operating capacity. Skid-steer development continued into the mid-1960s with the M600 loader.


A skid-steer loader can sometimes be used in place of a large excavator by digging a hole from the inside. The skid loader first digs a ramp leading to the edge of the desired excavation. It then uses the ramp to carry material out of the hole. The skid loader reshapes the ramp making it steeper and longer as the excavation deepens. This method is particularly useful for digging under a structure where overhead clearance does not allow for the boom of a large excavator, such as digging a basement under an existing house. Several companies make backhoe attachments for skid-steers. These are more effective for digging in a small area than the method above and can work in the same environments. Other applications may consist of transporting raw material around a job site, or assisting in the rough grading process.

SANY hydraulic excavators are precision-engineered digging tools built with industry-leading technology and highest-grade components to offer you maximum job site productivity. Our engines deliver top performance and tremendous power, with increased fuel efficiency and low emissions. Multiple working modes, intelligent control systems and a variety of attachments and parts allow versatile operation in all kinds of work environments. Whether it’s mining, road building, civil engineering, or general construction, SANY excavators are ready and able to get the job done.
The original skid-steer loader arms were designed using a hinge at the rear of the machine to pivot the loader arm up into the air in an arc that swings up over the top of the operator. This design tends to limit the usable height to how long the loader arm is and the height of that pivot point. In the raised position the front of the loader arm moves towards the rear of the machine, requiring the operator to move extremely close to or press up against the side of a tall container or other transport vehicle to get the bucket close enough to dump accurately. At the highest arm positions the bucket may overflow the rear of the bucket and spill directly onto the top of the machine's cab.
KIOTI has a full line of hay-hauling, dirt-digging, trail-blazing machines ready to take on any job that demands a durable compact tractor. Choose from the CS Sub Compact Series (22 hp – 25 hp), CK10 Series (25 hp – 40 hp), DK10 Series (45 hp – 55 hp), NX Series (45 hp -60 hp), RX Series (66 hp – 73 hp) or PX Series (90 hp - 110 hp) and find the one that’s right for you.
Excavators are a valuable tool in a wide range of applications, from digging trenches and preparing foundations on construction sites, to driving in piles on a farm. Clear snow in poor weather, dredge rivers, or demolish existing structures as part of a clearing operation. Access to a John Deere or Komatsu digger makes many projects easier, helping you to keep to deadlines and improve overall workforce efficiency. While most excavators have tracks, it is also possible to get wheeled models, which may be more suitable in certain working environments, especially if you need to drive between work sites on main roads or require extra maneuverability.
Who likes dropping or spilling materials? No one. That’s why CASE’s innovative Ride Control™ feature is such a benefit. Just push a button to automatically steady the loader arm when traveling at elevated speeds and the machine automatically compensates with greater shock absorption and reduced loader arm bounce, so you can work faster than ever without spilling your load.

The make and model category is further divided into the purpose in which a driver sits on the machine and drives it, and the other where the operator works alongside the vehicle. The type of drive is further broken down to wheel type and track type. The wheel type is then broken down into two, three, and four-wheel types of drives, while the track type is subdivided into full and half-track types of drives.
×