The first three-wheeled, front-end loader was invented by brothers Cyril and Louis Keller in Rothsay, Minnesota, in 1957.[2] The Kellers built the loader to help a farmer, Eddie Velo, mechanize the process of cleaning turkey manure from his barn. The light and compact machine, with its rear caster wheel, was able to turn around within its own length, while performing the same tasks as a conventional front-end loader.[2]


Jobsite dimensions are one of the greatest factors to know to fit the skid steer to the job. "Understanding physical limitations of the work area often dictates the class that may be used in the application," says Dennis Turney, Hyundai Construction Equipment. "The next consideration would be the lifting height or dumping height requirement, along with the capacity of the job. Finally, hydraulic capacity needs to known in order to operate any hydraulic attachments.
A skid-steer loader can sometimes be used in place of a large excavator by digging a hole from the inside. The skid loader first digs a ramp leading to the edge of the desired excavation. It then uses the ramp to carry material out of the hole. The skid loader reshapes the ramp making it steeper and longer as the excavation deepens. This method is particularly useful for digging under a structure where overhead clearance does not allow for the boom of a large excavator, such as digging a basement under an existing house. Several companies make backhoe attachments for skid-steers. These are more effective for digging in a small area than the method above and can work in the same environments. Other applications may consist of transporting raw material around a job site, or assisting in the rough grading process.

{"mixpanel":{"token":"d8e2403c38e139611f7556f2f50a4b39","props":{}},"siftscience":{"enabled":true,"key":"aca0b65b96","session":{"id":"205bdd67-0ee3-4cc4-9932-ccdfd046f259","actor":""}},"tail":{"params":{"cat01":"vehicles","cat02":"other-vehicles","cat03":"argentina"},"config":{"siteUrl":"www.olx.com.ar"}},"serverSide":{"r":922693,"referer":"-","locNm":"Argentina","locId":"2","locUrl":"www.olx.com.ar","locIso":"AR"}}
Visit our Cat Compact Loader Maintenance page on Cat.com. Take advantage of special offers on Cat Parts, shop for parts online, access maintenance schedules and get info on both tires and tracks. Also available for download is our latest Parts Reference Guide - listing out all part numbers required for the first 2,000+ hours of your Cat Skid Steer, Compact Track and Multi Terrain Loaders.
SSL (skid steer loader) refers to the standard wheeled machine.  CTL (compact track loader) and MTL (multi-terrain loader) refer to different undercarriage designs.  CTLs feature a steel embedded track and steel undercarriage components for maximum life in many applications.  MTLs have a rubber track undercarriage that delivers lower ground pressure compared to an SSL and CTL so they don’t tear up the ground as badly.
Indicadores del sistema de alarma para el operador: restricción del filtro de aire, salida del alternador, posabrazos levantado/operador fuera del asiento, temperatura del refrigerante del motor, presión del aceite de motor, activación de las bujías, restricción del filtro hidráulico, temperatura del aceite hidráulico, freno de estacionamiento conectado

An extended reach design uses multiple hinges and parallel lifting bars on the loader arm, with the main pivot points towards the center or front of the machine. This allows the loader arm to have much greater operating height while retaining a compact design, and allows the vertical movement to be less of an arc and more straight-up vertical, to keep the bucket forward of the operator's cab, allowing safe dumping into tall containers or vehicles.
No over-digging. No undercutting. No wasted time, fuel or dollars. SiteControl helps eliminate rework by making reliable, repeatable precision a reality. CASE offers tailor-made hardware and software solutions for all positioning and measuring tasks in construction, including ways for businesses to improve productivity and lower costs – both on and off your machine.
Los aceleradores manual y de pedal permiten al operador acoplar la velocidad del motor a la tarea que se va a realizar. El acelerador manual es ideal para trabajos que requieren velocidad constante del motor, como el perfilamiento de pavimento en frío, la apertura de zanjas o el soplado de nieve. El acelerador de pedal permite al operador variar la velocidad del motor y disminuir al mínimo el consumo de combustible en otras tareas, como las de carga y acarreo, carga de camiones, nivelación y explanación.
"Knowing the specific applications the customer would like to perform will help a rental business determine the size and power of machine needed to most efficiently complete the tasks," says Rostberg. "Asking questions and getting to the core of the customer's work will help determine this. Also, while inquiring about the customer's needs, a rental business might discover opportunities to rent attachments that will help the customer more quickly and efficiently complete their job."
Empresa ubicada en Sevilla cuya especialidad es el repuesto de la minicargadora así como los motores y partes de motor de las mismas tales como kubota, Yanmar, Perkins, Shibaura, Cummins, Deutz, Diter . . . etc, repuestos nuevos y usados. Distribuimos desde la Península, portes a Canarias económicos, culatas, cigueñales, bloque motor, kit de juntas, palancas de accionamiento, cabinas, tubo escape, brazos de minicargadora, botellas hidráulicas,bobcat, jcb, gehl, komatsu, fai panda, zetcat, case, Belle, Torfersa, bodcat, new holland, fiat hitachi ... Leer más
×