A skid-steer loader can sometimes be used in place of a large excavator by digging a hole from the inside. The skid loader first digs a ramp leading to the edge of the desired excavation. It then uses the ramp to carry material out of the hole. The skid loader reshapes the ramp making it steeper and longer as the excavation deepens. This method is particularly useful for digging under a structure where overhead clearance does not allow for the boom of a large excavator, such as digging a basement under an existing house. Several companies make backhoe attachments for skid-steers. These are more effective for digging in a small area than the method above and can work in the same environments. Other applications may consist of transporting raw material around a job site, or assisting in the rough grading process.
Some of the biggest names in the world produce skid steer loaders, including Bobcat, New Holland and Kubota. Consider a Boxer mini skid for domestic and small-scale applications, or invest in a powerful John Deere or Caterpillar loader for commercial use.  Even if you choose to buy a second-hand machine, you have the peace of mind that comes from knowing you have bought something built to last.
The Melroe brothers, of Melroe Manufacturing Company in Gwinner, North Dakota, purchased the rights to the Keller loader in 1958 and hired the Kellers to continue refining their invention. As a result of this partnership, the M-200 Melroe self-propelled loader was introduced at the end of 1958. It featured two independent front-drive wheels and a rear caster wheel, a 12.9 hp (9.6 kW) engine and a 750-pound (340 kg) lift capacity. Two years later they replaced the caster wheel with a rear axle and introduced the M-400, the first four-wheel, true skid-steer loader.[2] The M-440 was powered by a 15.5 hp (11.6 kW) engine and had an 1,100-pound (500 kg) rated operating capacity. Skid-steer development continued into the mid-1960s with the M600 loader.
Las herramientas pueden cambiarse rápida y fácilmente con el sistema de acoplador rápido de la máquina. El acoplador rápido estándar permite el acoplamiento y desacoplamiento manual de las herramientas utilizando dos palancas de alto efecto de apalancamiento. El acoplador rápido hidráulico optativo permite al operador cambiar rápidamente las herramientas sin salir de la cabina.
A skid-steer loader can sometimes be used in place of a large excavator by digging a hole from the inside. The skid loader first digs a ramp leading to the edge of the desired excavation. It then uses the ramp to carry material out of the hole. The skid loader reshapes the ramp making it steeper and longer as the excavation deepens. This method is particularly useful for digging under a structure where overhead clearance does not allow for the boom of a large excavator, such as digging a basement under an existing house. Several companies make backhoe attachments for skid-steers. These are more effective for digging in a small area than the method above and can work in the same environments. Other applications may consist of transporting raw material around a job site, or assisting in the rough grading process.
The wheels on a skid steer typically have no steering mechanism, they are in a fixed, straight line relative to the body of the machine.  By turning the left and right wheel pairs at different speeds, the machine turns by skidding, or dragging its wheels across the ground.  The rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine.  This skidding motion tears up the ground on which the machine operates.
Vendo implemento retro para minicargadora o tractor, totalmente nuevo, sin apenas uso, no más de 20h. sin nada de olgura, impecable. Pintura original. Mejor ver. similar a caterpillar Komatsu case new holand jcb 3cx Volvo bh 27 op 030 30 terraco retro mixta zanjadora cazo zanja retroexcavadora para tractor brazo implemento ascesorio pala destierro ahoyadora optimal melroe 730 sh 830 bobcat s130 753 853 s 160 200 sk 714 robot
×