ASV skid-steer loaders offer state-of-the-art technology for exceptional performance, durability, and operator comfort. Unlike most other skid steer brands, the ASV models give you exceptional ground clearance and a larger departure angle at the rear bumper, so you can climb easier and work more productively in a wider range of ground conditions - a hallmark of the ASV brand.
The first three-wheeled, front-end loader was invented by brothers Cyril and Louis Keller in Rothsay, Minnesota, in 1957.[2] The Kellers built the loader to help a farmer, Eddie Velo, mechanize the process of cleaning turkey manure from his barn. The light and compact machine, with its rear caster wheel, was able to turn around within its own length, while performing the same tasks as a conventional front-end loader.[2]
Skid-steer loaders are typically four-wheel vehicles with the wheels mechanically locked in synchronization on each side, and where the left-side drive wheels can be driven independently of the right-side drive wheels. The wheels typically have no separate steering mechanism and hold a fixed straight alignment on the body of the machine. Turning is accomplished by differential steering, in which the left and right wheel pairs are operated at different speeds, and the machine turns by skidding or dragging its fixed-orientation wheels across the ground. The extremely rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine. As with tracked vehicles, the high ground friction produced by skid steers can rip up soft or fragile road surfaces. They can be converted to low ground friction by using specially designed wheels such as the Mecanum wheel. Skid-steer loaders are capable of zero-radius, "pirouette" turning, which makes them extremely maneuverable and valuable for applications that require a compact, agile loader. Skid-steer loaders are sometimes equipped with tracks instead of the wheels, and such a vehicle is known as a multi-terrain loader.[1]
El único motor (de gasolina o diésel) de esta máquina suele estar acoplado en la parte trasera, en el punto de unión entre los brazos de la cuchara y el chasis. Cuenta con un sistema hidráulico para la elevación de la cuchara o para permitir el montaje de otros accesorios. El chasis se desplaza sobre un sistema de orugas o de neumáticos, siendo más habitual este último con una distribución de cuatro neumáticos de igual diámetro repartidos equitativamente a los lados.[cita requerida]
Vendo implemento retro para minicargadora o tractor, totalmente nuevo, sin apenas uso, no más de 20h. sin nada de olgura, impecable. Pintura original. Mejor ver. similar a caterpillar Komatsu case new holand jcb 3cx Volvo bh 27 op 030 30 terraco retro mixta zanjadora cazo zanja retroexcavadora para tractor brazo implemento ascesorio pala destierro ahoyadora optimal melroe 730 sh 830 bobcat s130 753 853 s 160 200 sk 714 robot
×