El sistema hidráulico de la máquina se ha fabricado para que proporcione potencia y fiabilidad máximas. Además de suministrar potencia a las ruedas, este sistema también proporciona las funciones de levantamiento e inclinación del cargador, alimenta el circuito auxiliar para impulsar las herramientas e impulsa el ventilador de enfriamiento del motor. Las bombas hidráulicas se impulsan directamente con el motor para obtener el máximo rendimiento hidráulico y una excelente fiabilidad sin utilizar correas. El sistema hidráulico también cuenta con:
The original skid-steer loader arms were designed using a hinge at the rear of the machine to pivot the loader arm up into the air in an arc that swings up over the top of the operator. This design tends to limit the usable height to how long the loader arm is and the height of that pivot point. In the raised position the front of the loader arm moves towards the rear of the machine, requiring the operator to move extremely close to or press up against the side of a tall container or other transport vehicle to get the bucket close enough to dump accurately. At the highest arm positions the bucket may overflow the rear of the bucket and spill directly onto the top of the machine's cab.
Skid-steer loaders are typically four-wheel vehicles with the wheels mechanically locked in synchronization on each side, and where the left-side drive wheels can be driven independently of the right-side drive wheels. The wheels typically have no separate steering mechanism and hold a fixed straight alignment on the body of the machine. Turning is accomplished by differential steering, in which the left and right wheel pairs are operated at different speeds, and the machine turns by skidding or dragging its fixed-orientation wheels across the ground. The extremely rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine. As with tracked vehicles, the high ground friction produced by skid steers can rip up soft or fragile road surfaces. They can be converted to low ground friction by using specially designed wheels such as the Mecanum wheel. Skid-steer loaders are capable of zero-radius, "pirouette" turning, which makes them extremely maneuverable and valuable for applications that require a compact, agile loader. Skid-steer loaders are sometimes equipped with tracks instead of the wheels, and such a vehicle is known as a multi-terrain loader.[1]
The conventional bucket of many skid loaders can be replaced with a variety of specialized buckets or attachments, many powered by the loader's hydraulic system. These include backhoe, hydraulic breaker, pallet forks, angle broom, sweeper, auger, mower, snow blower, stump grinder, tree spade, trencher, dumping hopper, pavement miller, ripper, tillers, grapple, tilt, roller, snow blade, wheel saw, cement mixer, and wood chipper machine.

recambio / repuesto / pieza original para maquinaria de obras públicas y construcción, de las marcas Furukawa (cargadoras, excavadoras y martillos), cargadoras Kawasaki, moto niveladora Mitsubishi, miniexcavadoras Hanix, martillos Konan MKB y Komac, Caterpillar, Komatsu, Frd , cargadoras y retrocargadoras Palazzani, martillos Montabert y Npk, bombas japonesas nachi y kawasaki, minicargadoras y miniexcavadoras Bobcat

×