No over-digging. No undercutting. No wasted time, fuel or dollars. SiteControl helps eliminate rework by making reliable, repeatable precision a reality. CASE offers tailor-made hardware and software solutions for all positioning and measuring tasks in construction, including ways for businesses to improve productivity and lower costs – both on and off your machine.
Jobsite dimensions are one of the greatest factors to know to fit the skid steer to the job. "Understanding physical limitations of the work area often dictates the class that may be used in the application," says Dennis Turney, Hyundai Construction Equipment. "The next consideration would be the lifting height or dumping height requirement, along with the capacity of the job. Finally, hydraulic capacity needs to known in order to operate any hydraulic attachments.

This machine size's ROC allows it to lift the heaviest loads, such as moving pallets of brick or dumping loads of dirt into the back of trucks. "These machines also have the horsepower and hydraulic flow to tackle tough jobs and attachments," says Rostberg. "Attachments that perform best with a high-flow machine, such as a wheel saw or planer for road construction or a forestry cutter for site preparation, work best with these machines."


The original skid-steer loader arms were designed using a hinge at the rear of the machine to pivot the loader arm up into the air in an arc that swings up over the top of the operator. This design tends to limit the usable height to how long the loader arm is and the height of that pivot point. In the raised position the front of the loader arm moves towards the rear of the machine, requiring the operator to move extremely close to or press up against the side of a tall container or other transport vehicle to get the bucket close enough to dump accurately. At the highest arm positions the bucket may overflow the rear of the bucket and spill directly onto the top of the machine's cab.

The wheels on a skid steer typically have no steering mechanism, they are in a fixed, straight line relative to the body of the machine.  By turning the left and right wheel pairs at different speeds, the machine turns by skidding, or dragging its wheels across the ground.  The rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine.  This skidding motion tears up the ground on which the machine operates.

Ahoyadores Angle Brooms Arrancador de árboles Barredoras Compactadora montada en la máquina Cucharas Cucharas trituradoras Cultivadores Desbrozadora Diente rompedor Enganche rápido Equipos de elevación Excavadora de zanjas Fresadoras Garras y cucharones Hojas Horquillas Implementos para la agricultura Implementos para nieve Light Equipment Martillos hidráulicos Multiprocesadores Palas Rastrillos Rodillos montados en la máquina Trituradora de tocones Zanjadoras de disco
×