used john deere tractors

2014 JOHN DEERE 1025R, H120 LOADER - 25HP YANMAR DIESEL, HYDRO TRANS., 4WD, 60D 60" DRIVE-OVER AUTOCONNECT MOWER DECK, DLX SEAT, FOLDING ROPS, REAR 3-PT HITCH, REAR PTO, FRONT BRUSH GUARD, R4 TIRES, 238 HOURS, GOOD CONDITION.|26x12-12 (4PR, R4 Industrial, 1 Position)|18x8.50-10 (4PR, R4 Industrial, 1 Position)|English North American Operator''s Manual and Decal Kit ...more

The main types of lawnmowers are the walk-behind mowers (push reel, gas or electric); riding (the fun one), hover mowers, which are push mowers that use an impeller system to push air down, allowing it to hover over the grass; and the robotic mower, which is an autonomous, self-guided unit that is as efficient at cutting the grass as it is at impressing (or frightening) the neighbors.


1994 John Deere 4960 MFWD Tractor, 180.6 Hrs Showing, 222 Hp, 7.6 L 6 Cylinder Turbocharged Diesel Engine, Powershift 15 Forward & 4 Reverse Gears, AC/Heat, AM/FM Radio, 3 Rear Sets Of Hydraulic Remotes, 3 Point, Draw Bar Hitch, Clevis Hitch, Large 1000 PTO, 14 Front Suitcase Weights, Rear Inner Weights, Rear Duals, Firestone Tires Front 16.9-30, Rear Tires 18.4R46, SN: RW4960P008173 ...more
Who likes dropping or spilling materials? No one. That’s why CASE’s innovative Ride Control™ feature is such a benefit. Just push a button to automatically steady the loader arm when traveling at elevated speeds and the machine automatically compensates with greater shock absorption and reduced loader arm bounce, so you can work faster than ever without spilling your load.
Visit our Cat Compact Loader Maintenance page on Cat.com. Take advantage of special offers on Cat Parts, shop for parts online, access maintenance schedules and get info on both tires and tracks. Also available for download is our latest Parts Reference Guide - listing out all part numbers required for the first 2,000+ hours of your Cat Skid Steer, Compact Track and Multi Terrain Loaders.
Tractor paid for, and loaded on to Kyle’s trailer, I called my wife. After a brief “conversation” about the home renovations all that cash could cover, the tractor was dropped off at Phelps’ garage. Rather than me figuring the machine out, I had Bill give it a once over, replace all the fluids, the few bad hoses, straighten the bent loader bucket, and re-pack that leaky swing arm cylinder. There was a new battery, too, and a few other things, which rung up to $1,500 or $500 more than I had anticipated before I started bidding.

On the end of the stick is usually a bucket. A wide, large capacity (mud) bucket with a straight cutting edge is used for cleanup and levelling or where the material to be dug is soft, and teeth are not required. A general purpose (GP) bucket is generally smaller, stronger, and has hardened side cutters and teeth used to break through hard ground and rocks. Buckets have numerous shapes and sizes for various applications. There are also many other attachments which are available to be attached to the excavator for boring, ripping, crushing, cutting, lifting, etc. Excavators in Scandinavia often feature a tiltrotator which allows attachments rotate 360 degrees and tilt +/- 45 degrees, in order to increase the flexibility and precision of the excavator.
Bobcat Company invented the world’s first skid-steer loader. Bobcat has celebrated a 50-year history of quality, performance and reliability. It’s no wonder they’re the world’s best selling skid-steer loader. When paired with a genuine Bobcat® attachment, each skid-steer model is a force to be reckoned with on your jobsite. And with more than a dozen models to choose from, you’ll find the right machine for any size job.
2008 Case IH Farmall 95 MFWD Tractor W/Loader, 575 Hrs Showing, FPT Turbocharged And Intercooled 4-Cyl, Diesel, Water Cooled Engine, 12 Forward Speeds, 540 PTO, Small 1000 PTO, Heater, AC, Radio, 320/85R24 Front Tires, 18.4-30 Rear Tires, 2 Wheel Steering, 3 Point Hitch, Block Heater, Additional Lighting Package With Beacon Light, 2 Auxiliary Hydraulics, 2 Doors, 12 Reverse Speeds, Rear PTO Location Axle(S), Mechanical Shuttle Shift Transmission *Includes* 2009 Model L730 Quick Attach Loader SN: Y9WLE4212, Quick Attach Mid Mounted Hydraulic Block, Live Hydraulic Joystick, Third Function For Grapple, 8 Foot Bucket, Standard Skid Loader Quick Attach Mount For Bucket, SN: Z8JP51190 ...more
"The livelihoods of our local businesses are being jeopardised by the thefts and they are forced to face the additional costs involved in repairing their premises. The populations served by the ATMs, which are often rural, are being denied access to cash facilities. Farmers and construction firms are suffering the loss of expensive equipment and machinery, a loss from which some will struggle to recover," he said.

The wheels on a skid steer typically have no steering mechanism, they are in a fixed, straight line relative to the body of the machine.  By turning the left and right wheel pairs at different speeds, the machine turns by skidding, or dragging its wheels across the ground.  The rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine.  This skidding motion tears up the ground on which the machine operates.
SANY hydraulic excavators are precision-engineered digging tools built with industry-leading technology and highest-grade components to offer you maximum job site productivity. Our engines deliver top performance and tremendous power, with increased fuel efficiency and low emissions. Multiple working modes, intelligent control systems and a variety of attachments and parts allow versatile operation in all kinds of work environments. Whether it’s mining, road building, civil engineering, or general construction, SANY excavators are ready and able to get the job done.
The sheer range of functions they are capable of makes skid steers highly sought after on the used skid steer loader market. Some skid loaders have an automatic attachment changing mechanism. This function allows the driver to change attachments without leaving the cab of the compact loader, as the hydraulic supply line couplings are located adjacent to the cab, and these can be connected or disconnected with ease. Othe skid steer loaders with an extended reach design are capable of a greater operating height and are able to unload into tall receptacles with ease. Skid steer loaders may even be capable of being used as an excavator; this is particularly useful in height restricted work areas where there may not be sufficient clearance for an excavator boom. If you want greater stability and traction in the worst terrain, then you'll want to check out a track skid steer second-hand market.
Sellers on eBay have new and used construction equipment from top brands, including Bobcat and Kubota, often at deep discounts. Purchasing refurbished or older models is a cost-effective way to shop, and also grants access to particular models and spare parts that may be difficult to find elsewhere. By taking advantage of these great prices, you have the opportunity to acquire machinery that might otherwise be outside of the budget of a sole trader or small business, helping you to get your fledgling business up and running without racking up large amounts of debt. Best of all, branded products offer the quality you expect from industry leaders, so second-hand machines are often still in excellent working condition with years of operational life.
KIOTI has a full line of hay-hauling, dirt-digging, trail-blazing machines ready to take on any job that demands a durable compact tractor. Choose from the CS Sub Compact Series (22 hp – 25 hp), CK10 Series (25 hp – 40 hp), DK10 Series (45 hp – 55 hp), NX Series (45 hp -60 hp), RX Series (66 hp – 73 hp) or PX Series (90 hp - 110 hp) and find the one that’s right for you.
Skid Steer loaders offer great versatility. Due to their compact size and zero-radius turning circle, it is possible to use them in confined spaces where many other types of heavy machinery cannot reach. They are ideal for landscaping in parks and yards, or moving earth around a construction site; and in some cases it is possible to use them in place of a full-scale excavator to dig holes. Sellers on eBay also offer specialized buckets and attachments for clearing snow, grinding tree stumps, mowing grass, or digging trenches. With so many practical applications, skid steer loaders represent an excellent investment for small businesses looking to streamline some of their methods and improve overall workforce efficiency, and they are also useful for homeowners or farmers with a lot of land to maintain.
The main benefit of electric mowers is monetary--eliminating gas and oil consumption and the changing of filters and spark plugs. Electric mowers are generally quieter than their combustion engine counterparts. Electric mowers leave no carbon footprint, making them more environmentally friendly. Electric mowers are usually lighter and easier to use than gasoline engine mowers.
Unlike in a conventional front loader, the lift arms in these machines are alongside the driver with the pivot points behind the driver's shoulders. Because of the operator's proximity to moving booms, early skid loaders were not as safe as conventional front loaders, particularly during entry and exit of the operator. Modern skid loaders have fully enclosed cabs and other features to protect the operator. Like other front loaders, it can push material from one location to another, carry material in its bucket or load material into a truck or trailer.

"The livelihoods of our local businesses are being jeopardised by the thefts and they are forced to face the additional costs involved in repairing their premises. The populations served by the ATMs, which are often rural, are being denied access to cash facilities. Farmers and construction firms are suffering the loss of expensive equipment and machinery, a loss from which some will struggle to recover," he said.
The Kubota ran tip-top for three months when a short blew the ignition switch. Horsing around with it I blew the starter. That was an easy fix, but another $250 in the hole. When the backhoe came off, I needed to buy 3-point arms, another $250. A year later, with all the other miscellaneous purchases, most not really needed, I probably have about $11,500 in the Kubota, which for a 45-horse with backhoe, really isn’t bad at all. If I ever need to sell it, I wouldn’t take much less than $15,000. Not that that’s going to happen anytime soon. I haven’t found much on our small property the tractor won’t do: snow removal, firewood, food plots, our big garden, cutting trails in the woods, dragging logs to be milled into lumber.
×