used john deere tractors

2014 NorTrac 25XT Compact Utility Tractor, 80 Hours, 25 hp Tier-4 Final Shibaura Liquid Cooled Diesel Engine, 21.6 Rear PTO hp, R4 Tires, MFWD, Differential Lock, 8 forward and 8 reverse speed transmission with a Synchro-shuttle upgrade, 540/1,000 RPM PTO, ROPS, sunshade and upgraded Grammer suspension seat, Front weights, Rear Hydraulics with 3rd SCV, Glow plugs, 3-pt NorTrac 60" Grooming Mower, Very clean. ...more
The Melroe brothers, of Melroe Manufacturing Company in Gwinner, North Dakota, purchased the rights to the Keller loader in 1958 and hired the Kellers to continue refining their invention. As a result of this partnership, the M-200 Melroe self-propelled loader was introduced at the end of 1958. It featured two independent front-drive wheels and a rear caster wheel, a 12.9 hp (9.6 kW) engine and a 750-pound (340 kg) lift capacity. Two years later they replaced the caster wheel with a rear axle and introduced the M-400, the first four-wheel, true skid-steer loader.[2] The M-440 was powered by a 15.5 hp (11.6 kW) engine and had an 1,100-pound (500 kg) rated operating capacity. Skid-steer development continued into the mid-1960s with the M600 loader.
The Kubota ran tip-top for three months when a short blew the ignition switch. Horsing around with it I blew the starter. That was an easy fix, but another $250 in the hole. When the backhoe came off, I needed to buy 3-point arms, another $250. A year later, with all the other miscellaneous purchases, most not really needed, I probably have about $11,500 in the Kubota, which for a 45-horse with backhoe, really isn’t bad at all. If I ever need to sell it, I wouldn’t take much less than $15,000. Not that that’s going to happen anytime soon. I haven’t found much on our small property the tractor won’t do: snow removal, firewood, food plots, our big garden, cutting trails in the woods, dragging logs to be milled into lumber.
For a standard household lawn mower under normal conditions, it is recommended to sharpen the blades twice a mowing season. It’s important to keep the blades sharp as they cut grass faster and cleaner, and this cleaner cut promotes faster lawn regrowth. If you notice decreased performance, uneven cutting patterns, or it is taking longer to mow your lawn, it might be time to check the blade. Take the mower to a certified blade sharpener.
A skid-steer loader can sometimes be used in place of a large excavator by digging a hole from the inside. The skid loader first digs a ramp leading to the edge of the desired excavation. It then uses the ramp to carry material out of the hole. The skid loader reshapes the ramp making it steeper and longer as the excavation deepens. This method is particularly useful for digging under a structure where overhead clearance does not allow for the boom of a large excavator, such as digging a basement under an existing house. Several companies make backhoe attachments for skid-steers. These are more effective for digging in a small area than the method above and can work in the same environments. Other applications may consist of transporting raw material around a job site, or assisting in the rough grading process.

Bobcat Company invented the world’s first skid-steer loader. Bobcat has celebrated a 50-year history of quality, performance and reliability. It’s no wonder they’re the world’s best selling skid-steer loader. When paired with a genuine Bobcat® attachment, each skid-steer model is a force to be reckoned with on your jobsite. And with more than a dozen models to choose from, you’ll find the right machine for any size job.
Tackle the toughest excavations with ease. From Ultra Compact to Mid Size, every Kubota excavator starts with a powerful, dependable and clean-running Kubota engine that delivers low noise and vibration, reliable performance, exceptional fuel efficiency and emission compliance. With spacious, comfortable cabs and superior strength and stability, they're easy to operate, maneuver, and control. Find the Kubota excavator that works best for you.
Hydraulic excavators usually couple engine power to (commonly) three hydraulic pumps rather than to mechanical drivetrains. The two main pumps supply oil at high pressure (up to 5000 psi) for the arms, swing motor, track motors and accessories while the third is a lower pressure (~700 psi) pump for pilot control of the spool valves; this third circuit allows for reduced physical effort when operating the controls. Generally, the 3 pumps used in excavators consist of 2 variable displacement piston pumps and a gear pump. The arrangement of the pumps in the excavator unit changes with different manufacturers using different formats.
2 SPEED CONTROL|AIR CONDITIONER|AUXILIARY HYDRAULICS|COUPLER, HYDRAULIC|EROPS|HEATER / DEFROSTER|HYDRAULICS, STANDARD FLOW|SELF LEVELING|BELT,SEAT,2" SUSPENSION|CONTROL,2SPD,PROP AUX,DLX WT|CONVERSION ARRANGEMENT|COUNTERWIEGHT|DOOR,CAB,GLASS|ENGINE,TIER 4 INTERIM|FAN,COOLING,DEMAND|HEATER,ENGINE COOLANT|HYD,STANDARD FLOW|MULTI-TERRAIN LOADER|QUICK COUPLER,HYD|ROPS,ENCLOSED WITH A/C 3| ...more
If you are looking for a used skid steer for sale, these are the major manufacturer names you will come across: ASV, BELLE, BOBCAT, CASE, CATERPILLAR, CONMIX, COUGAR, DAEWOO, DINGO, DITCH WITCH, DOOSAN, DOZCO, ERMOTEC, FIAT-HITACHI, FORWAY, GAMZEN, GEHL, HYDRA MAC, HYDROTEK, HYUNDAI, IHIMER, INGERSOLL RAND, JCB, JICO, JOHN DEERE, JUNLIAN, KOMATSU, KUBOTA, LIFTMAK UDYOG, LIUGONG, MASSEY FERGUSON, MELROE, MESSERSI, MUSTANG, NEW HOLLAND, PRIDE OF INDIA, RACOON, SCAT TRACK, SHERPA, SKYTRAK, SPACK, SUNDARAM, SUNWARD, SUSUMO, TAKEUCHI, TCM, TEREX, THOMAS, TORO, TOYOTA, VERMEER, VOLVO, WACKER NEUSON, YANMAR. With such a wide selection of used skid steer loaders to choose from, you are guaranteed to find the one that is right for you and your business.
The Kubota was definitely not pretty. It had clearly spent its life sleeping outside. I tried to start it and nothing happened. But when Kyle brought over a jump pack it started right up. Right away it would need a battery. We started to make a list: battery, leaky swing arm on the backhoe, the filters were all old – one of them dated 2010 – two hydraulic hoses needed replacement … I Googled parts and prices on my cell phone before the bidding started. Those replacements, plus all new fluids I figured would take another $1,000 ballpark to get the machine back to level.
Hydraulic excavators usually couple engine power to (commonly) three hydraulic pumps rather than to mechanical drivetrains. The two main pumps supply oil at high pressure (up to 5000 psi) for the arms, swing motor, track motors and accessories while the third is a lower pressure (~700 psi) pump for pilot control of the spool valves; this third circuit allows for reduced physical effort when operating the controls. Generally, the 3 pumps used in excavators consist of 2 variable displacement piston pumps and a gear pump. The arrangement of the pumps in the excavator unit changes with different manufacturers using different formats.
For a standard household lawn mower under normal conditions, it is recommended to sharpen the blades twice a mowing season. It’s important to keep the blades sharp as they cut grass faster and cleaner, and this cleaner cut promotes faster lawn regrowth. If you notice decreased performance, uneven cutting patterns, or it is taking longer to mow your lawn, it might be time to check the blade. Take the mower to a certified blade sharpener.
 For sale is a 2005 Caterpillar 304CR Excavator, Cab/Heat/Air, Aux Hydraulics, Mechanical thumb,2 Speed,  Backfill Blade, VERY GOOD tracks, Cat Coupler, 10,844# Operating weight, 43 HP Diesel engine, 4,221 Hours.  Cranks right up and runs good, Tracks straight, turns strong both directions.  Has some dents/dings/scratches but seems to be mechanically pretty sound.  Cylinders all seem dry.
Skid-steer loaders are typically four-wheel vehicles with the wheels mechanically locked in synchronization on each side, and where the left-side drive wheels can be driven independently of the right-side drive wheels. The wheels typically have no separate steering mechanism and hold a fixed straight alignment on the body of the machine. Turning is accomplished by differential steering, in which the left and right wheel pairs are operated at different speeds, and the machine turns by skidding or dragging its fixed-orientation wheels across the ground. The extremely rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine. As with tracked vehicles, the high ground friction produced by skid steers can rip up soft or fragile road surfaces. They can be converted to low ground friction by using specially designed wheels such as the Mecanum wheel. Skid-steer loaders are capable of zero-radius, "pirouette" turning, which makes them extremely maneuverable and valuable for applications that require a compact, agile loader. Skid-steer loaders are sometimes equipped with tracks instead of the wheels, and such a vehicle is known as a multi-terrain loader.[1]
SANY hydraulic excavators are precision-engineered digging tools built with industry-leading technology and highest-grade components to offer you maximum job site productivity. Our engines deliver top performance and tremendous power, with increased fuel efficiency and low emissions. Multiple working modes, intelligent control systems and a variety of attachments and parts allow versatile operation in all kinds of work environments. Whether it’s mining, road building, civil engineering, or general construction, SANY excavators are ready and able to get the job done.
Excavators (hydraulic) are heavy construction equipment consisting of a boom, dipper (or stick), bucket and cab on a rotating platform known as the "house".[1] The house sits atop an undercarriage with tracks or wheels. They are a natural progression from the steam shovels and often mistakenly called power shovels. All movement and functions of a hydraulic excavator are accomplished through the use of hydraulic fluid, with hydraulic cylinders and hydraulic motors.[2] Due to the linear actuation of hydraulic cylinders, their mode of operation is fundamentally different from cable-operated excavators which use winches and steel ropes to accomplish the movements.[3]
22HP and 25HP sub-compact 4WD tractors powered with fuel-efficient engines with 2 range Hydrostatic transmission. Sub-compact chassis allows maneuvering in small, confined spaces and are designed for maximum versatility with available front end loader, mid-mount mower and backhoe--all of which can be attached to the tractor at the same time. These tractors are tailored for small landowners, horse stall owners and commercial users. Each model includes more standard features and boasts superior performance at a lower price than the competition.
For those seeking a micro-excavator for urban or residential work, the Bobcat 325G track excavator offers the ability to perform excavation work in tight areas. Powered by a 27.7 horsepower Kubota diesel motor, the 325G is biased toward smaller excavation work like irrigation trenching, digging out smaller pools, and excavating pads for small structures.
Bobcat Company invented the world’s first skid-steer loader. Bobcat has celebrated a 50-year history of quality, performance and reliability. It’s no wonder they’re the world’s best selling skid-steer loader. When paired with a genuine Bobcat® attachment, each skid-steer model is a force to be reckoned with on your jobsite. And with more than a dozen models to choose from, you’ll find the right machine for any size job.
With my ideal tractor in mind, I was able to cut the list of 60 or 70 tractors for sale down to 20 or so. Before I got into seeing what those 20 fetched online, I dug into tractor forums looking for hands-on reviews. The New Hollands in the size class I was after, I found, were actually rebranded LS tractors, made in South Korea. A neighbor loaned me an LS awhile back and I wasn’t in love with it. The old Allis-Chalmers was a great machine, but parts were hard to find. A couple of the John Deeres had really positive chatter, as did the L3750, which a couple of guys on the Kubota forum said might be the best tractor Big Orange ever made. Before I started pricing the tractors out, that list of 20 or so was cut in half.
×