used john deere tractors

The huge inventory of heavy machinery on eBay makes it incredibly easy to find a product that suits your needs. Consider a small, tracked Bobcat for construction work in confined spaces, or choose a wheeled Caterpillar if you move between sites frequently and don't want to invest in a flatbed for transportation. Start browsing today, and find new ways to improve your operational efficiency.  
2014 JOHN DEERE 1025R, H120 LOADER - 25HP YANMAR DIESEL, HYDRO TRANS., 4WD, 60D 60" DRIVE-OVER AUTOCONNECT MOWER DECK, DLX SEAT, FOLDING ROPS, REAR 3-PT HITCH, REAR PTO, FRONT BRUSH GUARD, R4 TIRES, 238 HOURS, GOOD CONDITION.|26x12-12 (4PR, R4 Industrial, 1 Position)|18x8.50-10 (4PR, R4 Industrial, 1 Position)|English North American Operator''s Manual and Decal Kit ...more
ENGINE,(4JG1T-ISUZU) 81HP,3.059|LIGHTING, INTERIOR & WORK|AUXILIARY HYDRAULICS 19.8G|OROPS /EPA LABEL / AMICS|6567 / 08/01/18|SEAT,STANDARD W/BELT (WORN)|2 SPEED TRAVEL / PILOT CONTROL|ULTRA LOW SULFUR DIESEL FUEL|HEATER / DEFROSTER|HYDRAULICS, STANDARD FLOW|2007 GEHL CTL70 TRACK LOADER|AS IS / AS RECEIVED|BUCKET-GP, 76" W/EDGE|TRACKS, 18, 20/32 TREADS| ...more
Modern hydraulic excavators come in a wide variety of sizes. The smaller ones are called mini or compact excavators.[7] For example, Caterpillar's smallest mini-excavator weighs 2,060 pounds (930 kg) and has 13 hp; their largest model is the largest excavator available (a record previously held by the Orenstein & Koppel RH400), the CAT 6090, which weighs in excess of 2,160,510 pounds (979,990 kg), has 4500 hp, and a bucket as large as 52.0 m³.
2009 Caterpillar MT755B Tracked Tractor, 4,588.7 Hrs Showing, 290 Hp, Diesel, Water Cooled Engine, Hydrostatic, 16 Forward Speeds, Large 1000 PTO, Small 1000 PTO, Hydraulic Brakes, Heater, AC, Radio, Pin Hitch, 20 Weights, 118 Fuel Capacity, Tracked, 4 Reverse Speeds, Air Ride Drivers Seat, Buddy Seat, Bent First Step, 3 Point Hitch, Rear Quick Hitch, SN: 1754 ...more
John Deere 4200, year 1998. 26hp, 21pto hp. 2wd. Synchro Transmission. 761 hours. New front bearings, light electrical re-wired, new battery, new oil filter, new hydraulic seals, shifter jamming issue fixed, and new rocker bars. No issues, engine runs great. Asking $8000 Or best offer. If you have any questions or decide you want it, message me first. I am also willing to trade it for a different John Deere. Thanks!
The {Caterpillar (CAT) 320DL} is a massive excavator that is designed for medium to large jobs. This is not the unit that you'll see digging out a swimming pool in a residential area. Rather, these units traditionally see use in the energy or natural resource extraction market, or in larger-scale commercial operations. Boasting a 389 cubic inch CAT diesel motor, this 50,000 pound unit is powerful and capable, yet still transportable on a flatbed trailer behind a tractor trailer.

 For sale is a 2005 Caterpillar 304CR Excavator, Cab/Heat/Air, Aux Hydraulics, Mechanical thumb,2 Speed,  Backfill Blade, VERY GOOD tracks, Cat Coupler, 10,844# Operating weight, 43 HP Diesel engine, 4,221 Hours.  Cranks right up and runs good, Tracks straight, turns strong both directions.  Has some dents/dings/scratches but seems to be mechanically pretty sound.  Cylinders all seem dry.
Skid-steer loaders are typically four-wheel vehicles with the wheels mechanically locked in synchronization on each side, and where the left-side drive wheels can be driven independently of the right-side drive wheels. The wheels typically have no separate steering mechanism and hold a fixed straight alignment on the body of the machine. Turning is accomplished by differential steering, in which the left and right wheel pairs are operated at different speeds, and the machine turns by skidding or dragging its fixed-orientation wheels across the ground. The extremely rigid frame and strong wheel bearings prevent the torsional forces caused by this dragging motion from damaging the machine. As with tracked vehicles, the high ground friction produced by skid steers can rip up soft or fragile road surfaces. They can be converted to low ground friction by using specially designed wheels such as the Mecanum wheel. Skid-steer loaders are capable of zero-radius, "pirouette" turning, which makes them extremely maneuverable and valuable for applications that require a compact, agile loader. Skid-steer loaders are sometimes equipped with tracks instead of the wheels, and such a vehicle is known as a multi-terrain loader.[1]
* Rates as low as 0% for 72 months in the U.S. and 0% for 84 months in Canada. Offer valid on select models and subject to credit review and approval through AGCO Finance LLC. Dealer participation may vary. Contact your participating dealer for more details. Offer subject to change without notice. Full list of qualifying products can be found here.
The Kubota ran tip-top for three months when a short blew the ignition switch. Horsing around with it I blew the starter. That was an easy fix, but another $250 in the hole. When the backhoe came off, I needed to buy 3-point arms, another $250. A year later, with all the other miscellaneous purchases, most not really needed, I probably have about $11,500 in the Kubota, which for a 45-horse with backhoe, really isn’t bad at all. If I ever need to sell it, I wouldn’t take much less than $15,000. Not that that’s going to happen anytime soon. I haven’t found much on our small property the tractor won’t do: snow removal, firewood, food plots, our big garden, cutting trails in the woods, dragging logs to be milled into lumber.
The Melroe brothers, of Melroe Manufacturing Company in Gwinner, North Dakota, purchased the rights to the Keller loader in 1958 and hired the Kellers to continue refining their invention. As a result of this partnership, the M-200 Melroe self-propelled loader was introduced at the end of 1958. It featured two independent front-drive wheels and a rear caster wheel, a 12.9 hp (9.6 kW) engine and a 750-pound (340 kg) lift capacity. Two years later they replaced the caster wheel with a rear axle and introduced the M-400, the first four-wheel, true skid-steer loader.[2] The M-440 was powered by a 15.5 hp (11.6 kW) engine and had an 1,100-pound (500 kg) rated operating capacity. Skid-steer development continued into the mid-1960s with the M600 loader.

Comfort is a prerequisite to look for when purchasing a tractor, since the vehicle is used by farmers to do strenuous work such as hauling. Comfortable tractors are furnished with various features and capabilities that make them easy to use and manage while effectively performing their farm operations. Tractors are custom made and ensure comfort so that operators can work for longer periods without straining. The larger the operator's property, the more a comfortable tractor is required. A comfortable tractor is also multifunctional as it can haul, dig, lift, and pull heavy things.
×