used john deere tractors

Excavators are a valuable tool in a wide range of applications, from digging trenches and preparing foundations on construction sites, to driving in piles on a farm. Clear snow in poor weather, dredge rivers, or demolish existing structures as part of a clearing operation. Access to a John Deere or Komatsu digger makes many projects easier, helping you to keep to deadlines and improve overall workforce efficiency. While most excavators have tracks, it is also possible to get wheeled models, which may be more suitable in certain working environments, especially if you need to drive between work sites on main roads or require extra maneuverability.
The Kubota was definitely not pretty. It had clearly spent its life sleeping outside. I tried to start it and nothing happened. But when Kyle brought over a jump pack it started right up. Right away it would need a battery. We started to make a list: battery, leaky swing arm on the backhoe, the filters were all old – one of them dated 2010 – two hydraulic hoses needed replacement … I Googled parts and prices on my cell phone before the bidding started. Those replacements, plus all new fluids I figured would take another $1,000 ballpark to get the machine back to level.
1978 International 1586 2WD Tractor, 6,417 Hrs Showing, IH 436CI/7.1L 6-Cylinder Turbo Diesel, 6-Speed Transmission W/2-Speed TA, Planetary Final Drive, 540/1000 PTO, CAT III 3-Point Hitch, 3 Remotes, 12 Suitcase Weights On Front, 2 Sets Rear Axle Weights, 20.8R38 Rear Dual Tires, Hydraulic Seat, AM/FM 8-Track Stereo, NOTE: Key Broken Off In Ignition, Only One Battery Installed (See Pictures), SN: 2650151U15794 ...more
A smart combination of a compact excavator with a compact loader, the MCR range is now available in the 6, 8 and 10-tonne class. Quite simply unique, the 6MCR is a tracked excavator that can travel at speeds of up to 10 km/h, a compact loader with 360° rotation, a construction machine that can switch from excavator mode to skid loader mode in seconds.
The make and model category is further divided into the purpose in which a driver sits on the machine and drives it, and the other where the operator works alongside the vehicle. The type of drive is further broken down to wheel type and track type. The wheel type is then broken down into two, three, and four-wheel types of drives, while the track type is subdivided into full and half-track types of drives.
×